Using the Elite

1. To turn on the Elite, firmly press and hold the center button for 2 seconds on the button pad.
2. Press the plus (+) and minus (-) buttons on the button pad to increase or decrease speed.
3. Press the left (<) and right (>) arrows on the button pad to toggle between your Elite’s pre-loaded treatment presets.
4. The Elite should be used with the attachment making perpendicular contact with the skin. Only the attachment of the device should make contact with the skin or area you are treating. Do not use the device at an angle that puts the percussive arm of the device in contact with the skin.
5. To turn off the Elite, firmly press and hold the center button on the button pad until the device shuts down.

Connecting the Attachments
Ensure that your device is powered off before connecting or removing any attachments. Align the attachment with the tip of the arm and push to connect. To remove the attachment, hold the triangle grip with one hand, and the attachment with the other hand. Place one finger on each side of the plastic connector and firmly pull off the attachment. Warning: Do not place your finger between the attachment and the end of the arm, as this may cause pinching or injury.